| Turntable |
| Type |
3-speed, fully manual operation |
| Motor |
DC servo motor |
| Drive Method |
Direct drive |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Turntable Platter |
Die-cast aluminum |
| Starting Torque |
>1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and Flutter |
<0.2% (WTD) @ 3 kHz (JIS) |
| Signal-to-Noise Ratio |
>50 dB |
| Output Level |
Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| USB Function |
A/D, D/A – 16-bit/44.1 kHz or 48 kHz USB selectable; Computer interface – USB 2.0 Compliant Windows 7 or above, or MAC OS X or above |
| Power Supply Requirements |
100 to 240 V, 50/60 Hz, 1.5A Max |
| Power Consumption |
2.75 W |
| Dimensions |
452.0 mm (17.80") W x 352.0 mm (13.86") D x 141.6 mm (5.57") H |
| Weight |
8 kg (17.6 lbs.), without dust cover |
| Accessories Included |
AT-VM95E phono cartridge; AT-HS6 headshell; 1.9 m (6.2') USB cable; dual RCA (male) to dual RCA (male) cable with ground wire; counterweight; felt mat; dust cover; 45 RPM adapter; plug-type stylus target light |
| Tonearm Type |
Balanced S-shaped tonearm with detachable headshell |
| Effective Arm Length |
230.5 mm |
| Overhang |
16 mm |
| Tracking Error Angle |
Less than 3 degrees |
| Applicable Cartridge Weight |
3.5-8.5 g |
| Anti-skating Range |
0-4 g |
| Replacement Stylus |
AT-VMN95E |
| Communication System |
Bluetooth Version 5.0 |
| Maximum Communication Range |
Line of sight - approx. 10 m (33') |
| Compatible Bluetooth Profile |
A2DP |
| Support Codec |
Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC |
